Reset for system check, Oil life xxx% hold reset = new, Driver controls – FORD 2009 F-150 v.3 User Manual

Page 103

Advertising
background image

• Autolock
• Autounlock
• Easy Entry (if equipped)
• Trailer Sway (if equipped)
• Units (English/Metric)
• Language
• Reset to English (if in another language)
Reset For System check

Selecting this function from the
SETUP menu causes the message
center to cycle through each of the
systems being monitored. For each
of the monitored systems, the
message center will indicate either an OK message or a warning message
for three seconds.

Pressing the RESET control cycles the message center through each of
the systems being monitored.

The sequence of the system check report and how it appears in the
message center is as follows:

1. XXX% OIL LIFE

2. CHARGING SYSTEM

3. DOOR STATUS

4. BRAKE FLUID LEVEL

5. XX MILES TO E FUEL LEVEL XXX

6. TBC GAIN = XX.X
NO TRAILER (if equipped and no trailer connected)

7. TBC GAIN = XX.X
OUTPUT = ////// (if equipped and trailer connected)

Oil Life XXX% HOLD RESET = NEW

An oil change is required whenever indicated by the message center and
according to the recommended maintenance schedule. USE ONLY
RECOMMENDED ENGINE OILS.

2009 F-150 (f12)
Owners Guide (own2002), 3rd Printing
USA
(fus)

Driver Controls

103

Advertising