Positive retention floor mat, Driver controls – FORD 2009 F-150 v.3 User Manual

Page 112

Advertising
background image

TRAIN LEFT FRONT TIRE (if equipped) — Displayed when training
the TPMS system. Refer to TPMS reset procedure in the Tires, Wheels
and Loading
chapter for more information.

TRAIN RIGHT FRONT TIRE (if equipped) — Displayed when
training the TPMS system. Refer to TPMS reset procedure in the Tires,
Wheels and Loading
chapter for more information.

TRAIN RIGHT REAR TIRE (if equipped) — Displayed when training
the TPMS system. Refer to TPMS reset procedure in the Tires, Wheels
and Loading
chapter for more information.

TRAIN LEFT REAR TIRE (if equipped) — Displayed when training
the TPMS system. Refer to TPMS reset procedure in the Tires, Wheels
and Loading
chapter for more information.

TIRES NOT TRAINED – REPEAT (if equipped) — Displayed when
an error occurs while training the TPMS system. Refer to TPMS reset
procedure
in the Tires, Wheels and Loading chapter for more
information.

TRAINING COMPLETE (if equipped) — Displayed when training of
the TPMS system is complete. Refer to TPMS reset procedure in the
Tires, Wheels and Loading chapter for more information.

POSITIVE RETENTION FLOOR MAT

WARNING: Do not install additional floor mats on top of the
factory installed floor mats as they may interfere with the

accelerator or the brake pedals.

Position the floor mat so that the
eyelet is over the pointed end of the
retention post. Make sure that the
mat does not interfere with the
operation of the accelerator or the
brake pedal. To remove the floor
mat, reverse the installation
procedure.

2009 F-150 (f12)
Owners Guide (own2002), 3rd Printing
USA
(fus)

Driver Controls

112

Advertising