Driving, Starting, Positions of the ignition – FORD 2008 Escape Hybrid v.2 User Manual

Page 185: Preparing to start your vehicle

Advertising
background image

STARTING

Positions of the ignition

1. LOCK, locks the gearshift lever
and allows key removal.

2. ACCESSORY, allows the electrical
accessories such as the radio to
operate while the vehicle is not
running.

3. RUN, all electrical circuits
operational and warning lights will
illuminate. This is the position the
key is in when you’re driving.

4. START, starts the engine, vehicle and electrical power systems.

Preparing to start your vehicle

Engine starting is controlled by the electronically-controlled
Continuously Variable Transaxle (eCVT). For more information on
starting the vehicle, refer to Starting the vehicle in this chapter.

Extended idling at high engine speeds can produce very high
temperatures in the engine and exhaust system, creating the risk

of fire or other damage.

Do not park, idle, or drive your vehicle in dry grass or other dry
ground cover. The emission system heats up the engine

compartment and exhaust system, which can start a fire.

Do not start your vehicle in a closed garage or in other enclosed
areas. Exhaust fumes can be toxic. Always open the garage door

before you start the engine. See Guarding against exhaust fumes in
this chapter for more instructions.

If you smell exhaust fumes inside your vehicle, have your dealer
inspect your vehicle immediately. Do not drive if you smell

exhaust fumes.

2008 Escape Hybrid (ehv)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

185

Advertising