Power windows, One touch down (auto), Driver controls – FORD 2008 Escape Hybrid v.2 User Manual

Page 63

Advertising
background image

Indicator light Code

Green light is On — Power point is ready to supply power

Green light is Off — Power point power supply is off. Ignition is not in

RUN position

Green light is blinking — Power point is in fault mode

POWER WINDOWS

Do not leave children unattended in the vehicle and do not let
children play with the power windows. They may seriously injure

themselves.

When closing the power windows, you should verify they are free
of obstructions and ensure that children and/or pets are not in

the proximity of the window openings.

Press and pull the window switches
to open and close windows.
• Push down (to the first detent)

and hold the switch to open.

• Pull up (to the first detent) and

hold the switch to close.

Rear Window Buffeting: When one or both of the rear windows are
open, the vehicle may demonstrate a wind throb or buffeting noise. This
noise can be alleviated by lowering a front window approximately two to
three inches.

One touch down (AUTO)

Allows the driver’s window to open
fully without holding the control
down. Push the switch completely
down to the second detent and
release quickly. The window will
open fully. Momentarily press the
switch to any position to stop the
window operation.

AUTO

2008 Escape Hybrid (ehv)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

63

Advertising