Reset to english (if in another language), System check, Oil life – FORD 2008 Escape Hybrid v.2 User Manual

Page 75: Driver controls

Advertising
background image

• Autounlock (if equipped)
• Language

Reset to English (if in another language)

When entering the SETUP MENU
and a non-English language has
been selected, “PRESS RESET FOR
ENGLISH” will be displayed to
change back to English.

Press the RESET control to change back to English.

System check

Selecting this function from the
SETUP menu causes the message
center to cycle through each of the
systems being monitored. For each
of the monitored systems, the
message center will indicate either
an OK message or a warning message for four seconds.

Pressing the RESET control cycles the message center through each of
the systems being monitored. If you don’t press any button, the system
will cycle itself.

The sequence of the system check report is as follows:

1. Oil life

2. Electric drive

3. Brake system

4. Liftgate and glass

5. DTE/Fuel level

Oil life

An oil change is required whenever indicated by the message center.
USE ONLY RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change
(approximately 10,000 miles [16,000 km] or 12 months) perform the
following:

2008 Escape Hybrid (ehv)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

75

Advertising