Auxiliary power point (12vdc), Driver controls – FORD 2007 Crown Victoria v.2 User Manual

Page 59

Advertising
background image

1. Press and hold the desired
HomeLink

௡ button. DO NOT

release the button. The display will
read CHANNEL “X” (1,2 or 3)
TRANSMIT

2. The display will change to
CHANNEL “X” (1,2, or 3)
TRAINING after 20 seconds.
Without releasing the HomeLink

button, follow step 2 in the
“Programming” section.

For questions or comments, contact
HomeLink

௡ at www.homelink.com

or 1–800–355–3515.

AUXILIARY POWER POINT (12VDC)

Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.

The auxiliary power point is located under the cup holder and ashtray
drawer in the center stack. The auxiliary power point for five passenger
vehicles is located in the floor console storage bin.

Do not use the power point for operating the cigarette lighter element (if
equipped).

To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W.

To prevent the battery from being discharged, do not use the power
point longer than necessary when the engine is not running.

Always keep the power point caps closed when not being used.

2007 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

59

Advertising