Interior trunk control, Driver controls – FORD 2007 Crown Victoria v.2 User Manual

Page 80

Advertising
background image

Position the driver floor mat so that
the eyelet is over the pointed end of
the retention post and rotate
forward to lock in. Make sure that
the mat does not interfere with the
operation of the accelerator or the
brake pedal. To remove the floor
mat, reverse the installation
procedure.

INTERIOR TRUNK CONTROL

The remote trunk release control is
located on the driver’s door trim
panel and can be operated at any
time.

You can render the switch
inoperable by locking the button
with your master key.

If equipped with a perimeter alarm system, the remote trunk release
control and power door locks will be disabled when the vehicle perimeter
alarm system is armed. This control will not work until the vehicle
perimeter alarm system is disarmed. Refer to Perimeter Alarm System
in the Locks and Security chapter.

2007 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

80

Advertising