Snow tires and chains, Tires, wheels and loading – FORD 2007 Freestar v.2 User Manual

Page 201

Advertising
background image

any tire is under-inflated, carefully drive the vehicle to the nearest
location where air can be added to the tires. Inflate all the tires to the
recommended inflation pressure.

SNOW TIRES AND CHAINS

Snow tires must be the same size and grade as the tires you
currently have on your vehicle.

The tires on your vehicle have all weather treads to provide traction in
rain and snow. However, in some climates, you may need to use snow
tires and chains. If you need to use chains, it is recommended that steel
wheels (of the same size and specifications) be used as chains may chip
aluminum wheels.

Follow these guidelines when using snow tires and chains:
• Use only cable type SAE Class “S” chains. Conventional link or other

type chains may cause damage to your vehicle’s wheelhouse and/or
underbody.

• These cable type chains should only be applied to the front wheels.
• Install chains securely, verifying that the chains do not touch any

wiring, brake lines or fuel lines.

• Drive cautiously. If you hear the chains rub or bang against your

vehicle, stop and re-tighten the chains. If this does not work, remove
the chains to prevent damage to your vehicle.

• If possible, avoid fully loading your vehicle.
• Remove the tire chains when they are no longer needed. Do not use

tire chains on dry roads.

• The suspension insulation and bumpers will help prevent vehicle

damage. Do not remove these components from your vehicle when
using snow tires and chains.

2007 Freestar (win)
Owners Guide (post-2002-fmt)
USA
(fus)

Tires, Wheels and Loading

201

Advertising