Location of the spare tire and tools, Removing the jack and tools, Roadside emergencies – FORD 2007 Freestar v.2 User Manual

Page 240

Advertising
background image

Drive cautiously when using a full-size dissimilar spare tire/wheel and
seek service as soon as possible.

Location of the spare tire and tools

Note: The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the TPMS system, all road wheels equipped with the tire pressure
monitoring sensors must be mounted on the vehicle

Have a flat tire serviced by an authorized dealer in order to prevent
damage to the TPMS sensor, refer to Tire Pressure Monitoring System
(TPMS)
in the Tires, Wheels and Loading chapter. Replace the spare
tire with a road tire as soon as possible.

The spare tire and tools for your vehicle are stowed in the following
locations:

Item

Location

Spare tire

Under the vehicle, just forward of
the rear bumper.

Jack

Behind the access panel located
on the right rear quarter panel
interior trim.

Jack handle

Attached to the jack with a clip.

Flat tire tether, wing screw

Inside tire tether kit, next to jack.

Jack extension tool (cargo van
model only)

Attached to the jack kit.

Removing the jack and tools

1. Locate the access panel on the interior trim. Rotate the panel
retaining clip and remove the panel.

2. Remove the jack and lug nut wrench by turning the thumbscrew
counterclockwise to relieve tension against the stowage bracket.

2007 Freestar (win)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

240

Advertising