Driver controls – FORD 2007 Freestar v.2 User Manual

Page 76

Advertising
background image

3. Simultaneously press and hold
both the chosen HomeLink

௡ and

hand-held transmitter buttons until
the HomeLink

௡ indicator light

changes from a slow to a rapidly
blinking light. Now you may release
both the HomeLink

௡ and hand-held

transmitter buttons.

Note: Some entry gates and garage door openers may require you to
replace Step 3 with procedures noted in the “Gate Operator and
Canadian Programming” in this section for Canadian residents.

4. Firmly press, hold for five seconds and release the programmed
HomeLink

௡ button up to two separate times to activate the door. If the

door does not activate, press and hold the just-trained HomeLink

button and observe the indicator light.
• If the indicator light stays on constantly, programming is complete
and your device should activate when the HomeLink

௡ button is pressed

and released.
• If the indicator light blinks rapidly for two seconds and then turns
to a constant light continue with “Programming” Steps 5 through
7
to complete programming of a rolling code equipped device (most
commonly a garage door opener).

5. At the garage door opener receiver (motor-head unit) in the garage,
locate the “learn” or “smart” button (usually near where the hanging
antenna wire is attached to the unit).

6. Firmly press and release the “learn” or “smart” button. (The name and
color of the button may vary by manufacturer.)

Note: There are 30 seconds in which to initiate Step 7.

7. Return to the vehicle and firmly press, hold for two seconds and
release
the programmed HomeLink

௡ button. Repeat the

press/hold/release sequence again, and, depending on the brand of the
garage door opener (or other rolling code equipped device), repeat this
sequence a third time to complete the programming.

HomeLink

௡ should now activate your rolling code equipped device. To

program additional HomeLink

௡ buttons begin with Step 2 in the

“Programming” section. For questions or comments, please contact
HomeLink

௡ at www.homelink.com or 1–800–355–3515.

2007 Freestar (win)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

76

Advertising