Abs warning lamp, Brake assist (if equipped), Parking brake – FORD 2006 Expedition v.1 User Manual

Page 240: Abs p ! brake

Advertising
background image

ABS warning lamp

The ABS warning lamp in the
instrument cluster momentarily
illuminates when the ignition is
turned on. If the light does not
illuminate momentarily at start up,
remains on or continues to flash, the ABS needs to be serviced.

With the ABS light on, the anti-lock
brake system is disabled and normal
braking is still effective unless the
brake warning light also remains
illuminated with parking brake
released. (If your brake warning lamp illuminates, have your vehicle
serviced immediately.)

Brake Assist (if equipped)

The Brake Assist system provides full braking force during panic braking
situations. It detects a rapid application of the brake pedal and
maximizes the amount of brake booster assist, helping the driver to
achieve maximum braking pressure. Once a panic brake application is
detected, the system will remain activated as long as the brake pedal is
depressed. The system is deactivated by releasing the brake pedal.

When the system activates, the brake pedal will travel with very little
effort; this is normal.

Parking brake

Apply the parking brake whenever
the vehicle is parked. To set the
parking brake, press the parking
brake pedal down until the pedal
stops.

ABS

P

!

BRAKE

2006 Expedition (exd)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

240

Advertising