R (reverse), N (neutral), D (drive) with overdrive – FORD 2006 Expedition v.1 User Manual

Page 250: D (drive) without overdrive, Driving

Advertising
background image

Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and

remove the key whenever you leave your vehicle.

R (Reverse)

With the gearshift lever in R
(Reverse), the vehicle will move
backward. Always come to a
complete stop before shifting into and out of R (Reverse).

N (Neutral)

With the gearshift lever in N
(Neutral), the vehicle can be started
and is free to roll. Hold the brake
pedal down while in this gear.

D (Drive) with Overdrive

The normal driving position for the
best fuel economy. Transmission
operates in gears one through four.

D (Drive) without Overdrive

D (Drive) with Overdrive can be
deactivated by pressing the
transmission control switch (TCS)
on the end of the gearshift lever.

The transmission control indicator
light (TCIL) will illuminate in the
instrument cluster.

Transmission operates in gears one through three. D (Drive) without
Overdrive provides more engine braking than D (Drive) with Overdrive
and is useful when:
• driving with a heavy load.

• towing a trailer up or down steep hills.

• additional engine downhill braking is desired. If towing a trailer, refer

to Driving while you tow in the Trailer towing section.

O/D

OFF

2006 Expedition (exd)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

250

Advertising