Spare tire information, Location of the spare tire and tools, Removing the jack and tools – FORD 2006 Expedition v.1 User Manual

Page 279: Roadside emergencies

Advertising
background image

• Towing a trailer
• Driving vehicles equipped with a camper body
• Driving vehicles with a load on the cargo rack
Drive cautiously when using a dissimilar spare tire/wheel and seek
service as soon as possible.

Spare tire information

Note: If your vehicle is equipped with the tire pressure monitoring
system (TPMS), the system indicator light will illuminate when the spare
is in use. To restore the full functionality of the TPMS system, all road
wheels equipped with the tire pressure monitoring sensors must be
mounted on the vehicle

If your vehicle is equipped with TPMS, have a flat tire serviced by an
authorized dealer in order to prevent damage to the TPMS sensor, refer
to Tire Pressure Monitoring System (TPMS) in the Tires, Wheels and
Loading
chapter. Replace the spare tire with a road tire as soon as
possible.

Location of the spare tire and tools

The spare tire and tools for your vehicle are stowed in the following
locations:

Item

Location

Spare tire

Under the vehicle, just forward of
the rear bumper

Jack tools and jacking instructions Under the access panel located in

the floor compartment behind the
rear seat

Removing the jack and tools

1. Open the liftgate, then locate the access panel on the floor behind the
3rd row seat. Unlatch and remove the panel.

2. Remove the jack and tools assembly tray from the compartment by
turning the wing-nut counterclockwise to relieve tension against the jack
assembly tray.

3. Unsnap the wheel lug nut wrench, jack extension and handle from the
plastic tray. Remove the jack and instruction sheet from the tray
assembly.

2006 Expedition (exd)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

279

Advertising