Canon SX7 MARKII - Manual (Page 37)

37
PROJ
ECTIN
G
AN IMAGE
FROM TH
E COMPUT
ER
z Before connecting cables, turn off both the projector and computer.
z It may project an image inappropriately when projecting the digital PC signal in 1280 x 1024
or 1400 x 1050 depending on the type of computer or DVI cable (SX7 II/SX60).
z The USB terminal is used to use the remote control as the computer mouse. An image can-
not be projected simply by connecting the USB cable.
DVI cable
Computer
Projector
To monitor output terminal
(DVI terminal)
Input Terminal-1
(DIGITAL IN)
Optional DVI digital cable
[LV-CA29]
Input Signal: Select [DIGITAL PC] (P48)
5-BNC cable
Computer
Projector
To monitor output terminal
(5-BNC output terminal)
Input Terminal-2
(ANALOG IN-2)
Commercial 5-BNC
cable (for 5-BNC/
mini D-Sub 15-pin)
Input Signal: Select [ANALOG PC-2] (P50)
Extension cable
Commercial 5-BNC
extension cable