Canon SX7 MARKII - Manual (Page 56)

56
PROJ
ECTIN
G
AN IMAGE
FROM TH
E COMPUT
ER
SX7 MarkII SX60 X700
Standard
Presentation
Movie
Photo
AdobeRGB
sRGB Standard
Presentation
Movie
Home Cinema
sRGB Standard
Presentation
Movie
sRGB
z You can adjust the followings for each image mode. For detailed information on the proce-
dures, refer to "Image Adjustment Menu" (P102 to 110).
- Brightness Adjust this when the image is too bright or dark.
- Contrast Adjust this to decrease or increase contrast of the entire image.
- Sharpness Adjust this to soften or sharpen an image.
- Gamma Adjust this when light or dark portions of an image are obscure.
- Color adjustment
Adjust this to adjust the color level and balance.
- Advanced adjustment
Adjust this when color tones are different from those of the original image.
z The results of adjustments are saved for each input signal. Once you save them, you can
project images with the same settings.
z You can set an image mode from the menu. Refer to [Image mode] section in the menu
(P102)