Canon SX7 MARKII - Manual (Page 48)

48
PROJ
ECTIN
G
AN IMAGE
FROM TH
E COMPUT
ER
Selecting an Input Signal
You can select an input signal type.
Select an input signal from the followings:
ANALOG PC-1 : Analog signal Connecting with a DVI/Mini D-sub 15-pin cable
(supplied cable)
DIGITAL PC : Digital signal Connecting with a DVI digital cable
ANALOG PC-2 : Analog signal Connecting with a VGA cable or 5-BNC cable
Select an appropriate input signal before starting the auto setup function by following the
steps below if you change the input signal due to changing the connection to the computer
or so.
„ Selecting [ANALOG PC-1] or [DIGITAL PC]
1
Press the [INPUT] button.
The [INPUT] window appears.
2
Select [ANALOG PC-1] or [DIGITAL PC] in the menu with the [INPUT] button.
The selection is toggled through available input signal types from above.
z An LED for a terminal flashes in green if a cable is connected and an input signal is con-
firmed. An LED for a terminal turns on if the projected image is obtained through the termi-
nal (P26, 27).
z Connecting a DVI cable to Input Terminal-1, select the appropriate input signal with the
[INPUT] button in accordance with the setting on the computer (digital signal/analog sig-
nal).
z You can select any input signal type from all options through the [ ] / [ ] button.
<
<