FORD 2005 Escape v.2 - Manual (Page 28)

1. CD: To begin CD play, insert a
CD into the slot, label side up. The
system will auto-load the CD and
begin play after a short pause. The disc number and track number will
illuminate in the display.
If a CD is already loaded into the system, press CD to enter CD mode
and select the desired CD to play.
2. AUTO — SCAN:AUTO: Auto
memory tuning allows you to set
strong radio stations without loosing
your original manually set preset stations.
Press the AM or FM1/2 control to select a frequency. Press and
momentarily hold the AUTO-M control. The system will beep. When the
first six strong stations are filled, the strongest station will start playing.
Press AUTO-M to select from the stored stations. One stored station will
be selected and played each time the control is pressed. The frequency
and the channel number will be displayed.
SCAN: Scan works in radio and CD mode. Press SCAN to hear a brief
sampling of all listenable stations on the frequency band or the first ten
seconds each track. Press SCAN again to stop.
3. Eject:Press to eject the CD
currently playing. Press CD plus the
preset number to eject a specific
CD. Press and hold to eject all CDs.
4. TUNE — MENU: Press to enter
Menu mode. Press repeatedly to
scroll through the following options:
Treble: Press the control until
TREB appears in the display. Turn
the control to increase/decrease the
level of treble.
Bass: Press the control until BASS appears in the display. Turn the
control to increase/decrease the level of bass.
Fade: Press the control until FADE appears in the display. Turn the
control to adjust the sound between the rear and front speakers.
Balance: Press the control until BAL appears in the display. Turn the
control to adjust the sound between the left and right speakers.
Mid-range (if equipped): Press the control until MID appears in the
display. Turn the control to increase/decrease the level of mid-range.
2005 Escape (204)
Owners Guide (post-2002-fmt)
USA English (fus)
Entertainment Systems
28