Lights – FORD 2005 Escape v.2 User Manual

Page 37

Advertising
background image

delay time may be changed by following the steps below (steps 1
through 6 must be done within 10 seconds):

1. Turn the key to the 1 (LOCK)
position.

2. Rotate the headlamp control to
the autolamp position.

3. Rotate the headlamp control to
the OFF position.

4. Turn the key to the 3rd (ON)
position.

5. Turn the key back to the 1st
(LOCK) position.

6. Turn the headlamp control to the autolamp position (the headlights
should turn on).

7. Turn the headlamp control to the OFF position when the desired
delay time (up to 3 minutes) has been reached.

Foglamp control (if equipped)

Turn on the low-beam headlamps.
Press the foglamp control, located
on the instrument panel, to activate
the foglamps. The foglamp LED will
illuminate when the foglamps are
on. When the highbeams are
activated, the foglamps will not
operate.

Press the foglamp control to deactivate the foglamps.

Daytime running lamps (DRL) (if equipped)

Turns the lowbeam headlamps on with a reduced output.

To activate:
• the ignition must be in the ON position.
• the headlamp control is in the OFF, parking lamps or autolamp

position.

• the vehicle not in park and the parking brake released.

2005 Escape (204)
Owners Guide (post-2002-fmt)
USA English
(fus)

Lights

37

Advertising