Instrument cluster – FORD 2005 Ranger v.3 User Manual

Page 15

Advertising
background image

Trip odometer: Registers the miles
(kilometers) of individual journeys.
Press the button once until “TRIP”
appears in the display (this
represents the trip mode). To reset
the trip, press and hold the control
again for approximately 2 seconds,
until the trip reading is 0.0 miles (kilometers). To toggle between trip
and odometer, press and release the control.

Tachometer: Indicates the engine
speed in revolutions per minute.
Driving with your tachometer
pointer continuously at the top of
the scale may damage the engine.

Fuel gauge: Indicates
approximately how much fuel is left
in the fuel tank (when the ignition
is in the ON position). The fuel
gauge may vary slightly when the
vehicle is in motion or on a grade.

Proper gauge indication requires the
ignition to be in the OFF or
ACCESSORY position during refueling, otherwise correct fuel indication
after refueling can be slow to update. Also, a minimum of 3 gallons is
needed for correct indication after refueling.

The arrow near the fuel pump icon indicates which side of the vehicle
the fuel filler door is located.

Refer to Filling the tank in the Maintenance and Specifications
chapter for more information.

2005 Ranger (ran)
Owners Guide (post-2002-fmt)
USA
(fus)

Instrument Cluster

15

Advertising