FORD 2005 Ranger v.3 - Manual (Page 55)

To remove the bed extender:
1. Extend the bed extender.
2. Pull the round knobs on each side
of the extender to unlock it.
Make sure the locking clip screws
are loose before removing the
extender.
3. Press the locking clips below the
middle bar on each side and lift the
extender out of the bed.
Note: Remove and store the bed extender when not in use.
To install the bed extender, follow the removal procedure in reverse
order.
2005 Ranger (ran)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
55