FORD 2005 Ranger v.3 - Manual (Page 238)

1 Add 118 ml (4 oz.) of Additive Friction Modifier XL-3 or equivalent
meeting Ford specification EST-M2C118–A for complete refill of
Traction-Lok axles.
2 Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON
௡ and MERCON௡ V are not interchangeable. DO NOT
mix MERCON
௡ and MERCON௡ V. Refer to your scheduled maintenance
information to determine the correct service interval.
ENGINE DATA
Engine 2.3L I4 engine 3.0L V6 engine 4.0L V6 engine
Cubic inches 138 182 245
Required fuel 87 octane 87 octane 87 octane
Firing order 1-3-4-2 1-4-2-5-3-6 1-4-2-5-3-6
Ignition system EDIS EDIS EDIS
Spark plug gap
0.049–0.053 inch
(1.25–1.35 mm) 0.042–0.046 inch
(1.07–1.17 mm) 0.052–0.056 inch
(1.32–1.42 mm)
Compression
ratio
9.7:1
9.7:1 9.7:1
VEHICLE DIMENSIONS
Vehicle
dimensions Regular Cab
Short Wheel
Base (SWB) -
inches (mm) Regular Cab
Long Wheel
Base (LWB))
- inches (mm) SuperCab) -
inches (mm)
(1) Overall length 188.5 (4788) 200.4 (5092) 202.6 (5147)
(2) Overall width 69.4 (1762) 69.4 (1762) 70.3 (1785)
(3) Overall height
– 4x2/4x4 65.0 (1652) /
68.5 (1740) 66.0 (1677) /
68.4 (1737) 66.0 (1676) /
68.7 (1746)
(4) Wheelbase 111.4 (2831) 117.4 (2983) 125.7 (3192)
(5) Track - Front 58.5 (1486) 58.5 (1486) 58.5 (1486)
(5) Track - Rear 57.3 (1455) 57.3 (1455) 57.3 (1455)
2005 Ranger (ran)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
238