Lights – FORD 2004 F-150 v.5 User Manual

Page 49

Advertising
background image

Replacing headlamp bulbs

1. Make sure that the headlamp control is in the OFF position and open
the hood.

2. At the top and inboard side of the
headlamp, loosen the three retaining
screws.

3. Once the three retaining screws
have been removed, disengage the
tab at the top center of the
headlamp assembly by lifting it up.

4. Slide headlamp assembly forward
disconnecting the snap attachment
at the fender and disconnect the
electrical connector from the bulb by pulling rearward.

5. Remove the bulb by turning it
counterclockwise, then pull it
straight out.

Handle a halogen headlamp bulb carefully and keep out of
children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.

Install the new bulb in reverse order.

2004 F150 (f12)
Owners Guide (post-2002-fmt)
USA English
(fus)

Lights

49

Advertising