Driver controls – FORD 2004 F-150 v.5 User Manual

Page 75

Advertising
background image

Setup menu

Press this control for the following
displays:
• System Check
• Units (English/Metric)
• Autolock
• Autolamp Delay
• Language
System check

Selecting this function from the
SETUP menu causes the message
center to cycle through each of the
systems being monitored. For each
of the monitored systems, the
message center will indicate either an OK message or a warning message
for three seconds.

Pressing the RESET control cycles the message center through each of
the systems being monitored.

The sequence of the system check report and how it appears in the
message center is as follows:

1. FUEL LEVEL

2. ENGINE TEMP

3. OIL PRESSURE

4. BRAKE FLUID LEVEL

5. CHARGING SYSTEM

Units (English/Metric)

1. Select this function from the
SETUP menu for the current units
to be displayed.

2. Press the RESET control to
change from English to Metric.

Autolocks

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.

2004 F150 (f12)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driver Controls

75

Advertising