Controls and features – FORD 2002 Explorer v.1 User Manual

Page 30

Advertising
background image

AUTOLAMP CONTROL

The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.

The autolamp system also keeps the
lights on for approximately 20
seconds after the ignition switch is
turned to OFF.
• To turn autolamps on, rotate the control counterclockwise.
• To turn autolamps off, rotate the control clockwise to OFF.
• Foglamps are not controlled by the autolamps. In order to turn on the

foglamps, you must turn the lamp switch to the

position and

pull toward you for fog.

POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)

The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P(Park) position.

Press and hold the rocker control to
adjust accelerator and brake pedal.
• press the bottom of the control to

adjust the pedals toward you

• press the top of the control to

adjust the pedals away from you

The adjustment allows for approximately 76mm (3 inches) of maximum
travel.

Never adjust the accelerator and brake pedal with feet on pedals
or while the vehicle is moving.

REVERSE SENSING SYSTEM (IF EQUIPPED)

The reverse sensing system (RSS) sounds a tone to warn the driver of
obstacles near the rear bumper when the reverse gear is selected.

A

Controls and features

30

Advertising