Controls and features – FORD 2002 Explorer v.1 User Manual

Page 44

Advertising
background image

(floor/defrost) — Distributes outside air through the windshield

defroster ducts, the demister outlets and the front and rear seat floor
ducts. If the temperature is about 6°C (43°F) or higher, the air
conditioner will automatically dehumidify the air to reduce fogging. (Note
that the A/C indicator does not illuminate when this mode is selected.)
Recirculation and A/C override controls cannot be selected. For added
customer comfort, the air distributed through the floor ducts may be
slightly warmer than the air sent to the windshield defroster ducts.

(defrost) — Distributes outside air through the windshield defroster

ducts, the demister outlets and the center console registers. It can be
used to clear ice or fog from the windshield. If the outside air temperature
is about 6°C (43°F) or higher, the air conditioner will automatically
dehumidify the air to reduce fogging. (Note that the A/C indicator does
not illuminate when this mode is selected.) Recirculation and A/C override
controls cannot be selected. For added customer comfort, the system will
allow some airflow through the floor ducts in this mode.
Turn DEATC off
OFF-Outside air is shut out. The fan, heating and air conditioning will
not operate. The outside temperature will still display when selected
with the ignition in the ON position.

R

(rear window defroster) — Refer to Rear Window Defroster.

Displaying outside temperature

Press EXT to display the outside air temperature. It will remain selected
until the EXT control is pressed again.

If the driver or passenger temperature or the fan speed is changed, or
the AUTO or

modes are selected while the outside temperature is

displayed, the driver and passenger temperature display will be displayed

AUTO

DUAL

OFF

A/C

R

EXT

EXT TEMP

F C

F

Controls and features

44

Advertising