Climate controls – FORD 2002 F-150 v.3 User Manual

Page 59

Advertising

• Do not put objects under the front seat which may interfere with the

airflow to the rear seats (if equipped).

• Remove any snow, ice or leaves from the air intake area (at the

bottom of the windshield and underneath the hood).

• Do not place objects over the defroster outlets. These objects can

block airflow and reduce visibility through your windshield. Avoid
placing small objects on top of the instrument panel. These objects
may fall down into the defroster outlets and block airflow, in addition
to, damaging the climate control system.

To aid in side window defogging/demisting in cold weather conditions:

1. Select the position that distributes air through the Panel and Floor.

2. Set the temperature control to full heat.

3. Set the fan speed to full fan.

4. Direct the outer panel vents towards the side windows.

5. To increase airflow to the outer panel vents, close the central panel
vents.

Do not place objects on top of the instrument panel as these
objects may become projectiles in a collision or sudden stop.

ELECTRONIC AUTOMATIC TEMPERATURE CONTROL (EATC)
SYSTEM (IF EQUIPPED)

The EATC system will maintain a
selected temperature and
automatically control airflow. You
can override automatic operation
with any of the override controls,
the fan speed control or the steering
wheel controls (if equipped).

Turning the EATC on

Press AUTOMATIC, any of the
override controls or the fan speed
control. The EATC will only operate
when the vehicle is running.

VENT

PNL • FLR

FLOOR

FLR • DEF

DEF

MAX A/C

OUTSIDE TEMP

AUTOMATIC

OFF

AUTO