FORD 2002 F-150 v.3 - Manual (Page 61)

To control the temperature, select
any temperature between 18°C
(65°F) and 29°C (85°F) by pressing
the blue (cooler) or red (warmer)
buttons.
For continuous maximum cooling, push the blue button until 16°C
(60°F) is shown in the display window. The EATC will continue
maximum cooling (disregarding the displayed temperature) until a
warmer temperature is selected by pressing the red control.
For continuous maximum heating, push the red button until 32°C (90°F)
is shown in the display window. The EATC will continue maximum
heating (disregarding the displayed temperature) until a cooler
temperature is selected by pressing the blue control.
Temperature conversion
Press MAX A/C and DEF at the
same time (for one second) to switch
between Fahrenheit and Celsius.
The English/Metric (E/M) control on
the trip computer and message
center (if equipped) will not change temperature display.
Fan speed ( )
When AUTOMATIC is pressed, fan
speed is adjusted automatically for
existing conditions. You can override
fan speed at any time. To control fan
speed manually, use the thumbwheel
to cancel automatic fan speed
operation. Rotate the thumbwheel or press the steering wheel controls (if
equipped) up for higher fan speed or down for lower fan speed.
The display will show to
indicate manual fan operation.
To return to automatic fan operation, press AUTOMATIC.
VENT PNL • FLR MAX A/C
OUTSIDE TEMP
VENT PNL • FLR FLOOR FLR • DEF DEF
HI
LO MAX A/C
OUTSIDE TEMP AUTOMATIC
OFF
AUTO
˚ F
AUTO
Climate Controls
61