FORD 2001 Focus - Manual (Page 252)

Maintenance and care
252
AIMING THE HEADLAMPS
The headlamps on your vehicle are
properly aimed at the assembly
plant.
If your vehicle has been in an
accident the alignment of your
headlamps should be checked by a
qualified service technician.
Vertical aim adjustment
1. Park the vehicle on a level
surface approximately 7.6 meters
(25 feet) from a vertical wall or
screen directly in front of it.
2. Measure the height of the
headlamp bulb center from the
ground and mark a 2.5 meters
(8 foot) horizontal reference line on
the vertical wall or screen at this
height (a piece of masking tape
works well).
3. Turn on the low beam
headlamps to illuminate the wall or
screen and open the hood.