FORD 2001 Focus - Manual (Page 253)

Maintenance and care
253
4. On the wall or screen you will
observe an area of high intensity
light. The top of the high intensity
area should touch the horizontal
reference line, if not, the beam will
need to be adjusted.
5. Locate the vertical adjuster on
each headlamp, using a 7 mm Allen
head wrench, turn the adjuster
either clockwise (to adjust down)
or counterclockwise (to adjust up),
the high intensity area should touch
the horizontal reference line.
6. HORIZONTAL AIM IS NOT
REQUIRED FOR THIS VEHICLE
AND IS NONĆADJUSTABLE.
7. Close the hood and turn off the
lamps.