Hudson Robotics Bar Code Print and Apply - Manual (Page 19)

Print and Apply User Manual Hudson Robotics, Inc.
17
Once the head is over the label, press the “Save Point” button. It is highly recommended
to test label retrieval now. Press the “Test Label Retrieval” button to test how it picks up
a label. If it picks up a label within 2 seconds of its first attempt, it is taught properly.
If the user needs additional assistance in understanding this screen, the user may click on
the two help buttons labeled “What is the Label Retrieval Point?” or “What are the
Vacuum Cutoff Values for?” for additional information during setup.
0.030” Gap
Front Edge
of tamp head
Front edge
or strip bar