Appendix ii – use of pid and oid numbers – ITC ProTime Microcoagulation System User Manual
Page 27
27
APPENDIX II – USE OF PID AND OID NUMBERS
The PID/OID selection is indicated only by the location of the highlight (text on the screen is unchanged).
•
Use the button to select PID/OID options:
•
Selecting PID/OID ON enables both a patient ID and operator ID to be entered.
•
Selecting PID ON enables only a patient ID to be entered.
•
Selecting OID ON enables only an operator ID to be entered.
•
Selecting OFF disables both a patient ID and operator ID.
Note: The selection is highlighted and remains the default until changed again by the user.
Entering and Changing Numerical Information (PID/OID, Password)
By using a combination of the and buttons and the triangular cursor on the display screen, numeric
information can be entered into the instrument for operator identification number (OID), patient
identification number (PID) and PASSWORD fields. When entering numeric information into a field,
pressing a button has the following actions:
•
CHANGE - Pressing the button once will increment the digit in the current cursor position by
one, starting at 0 and going through 9 and back to 0 again.
•
OK - Pressing the button briefly enters the digit displayed in the current cursor position and then
moves the cursor right to the next field position. Pressing the button for 2 seconds or longer saves
the complete numeric field.
EXAMPLE: Entering a PID number:
With the PID feature enabled, the following screen appears after a cuvette is inserted into the instrument:
To enter a PID, the first position in the PID field (starting from the left) is indicated by a triangular cursor.
•
Press the button until the desired digit is displayed.
•
Press the button briefly to enter the digit in that position of the field. The cursor will automatically
move to the next field position.
•
Repeat these steps until the desired field length is entered.
•
To save the entered PID value, press and hold the button for approximately 2 seconds until the
second audio beep is heard.
Note: These audio beeps will be heard regardless of BEEP setting (ON/OFF).