ITC ProTime Microcoagulation System - Manual (Page 28)

28
After the cuvette is inserted, the user has the option to set an operator ID (OID) and/or a patient ID (PID) if
the OID and/or PID have been enabled in SET UP section of MAIN MENU. The PID may contain up to twelve
digits, the OID can be a value with up to six digits.
Note: In the different scenarios related to SET PID/OID ON/OFF settings, some of the following
four screens are not presented to the user. For example, none of these four screens will appear,
if both PID and OID are set to OFF value. The default numerical PID and OID values are zero.
If OID is set to the ON position, the following screen will appear:
Use the and buttons to move the cursor and to enter the numeric ID.
The CONFIRM OID confirmation screen will follow the ENTER OID screen:
If button is pressed, the user will return to the previous screen, otherwise (if the button is pressed
and PID is set to the ON position) the program will proceed to the following ENTER PID screen:
Use the and buttons to move the cursor and to enter the numeric ID.