Jeppesen FliteDeck Pro 8 (Windows 8.1) - Manual (Page 37)

Jeppesen FliteDeck Pro App Settings
Sleep Mode Setting
Jeppesen FliteDeck Pro User Guide August 2014
Copyright © 2014 Jeppesen. All rights reserved.
32
Sleep Mode Setting
Sleep Mode is On by default. When Sleep Mode is on, the device
settings control whether and when the device enters sleep mode.
If your device settings permit the device to enter sleep mode,
turning the Sleep Mode to Off in FliteDeck Pro overrides the
device settings as long as FliteDeck Pro runs in the foreground. If
you switch to another app, the device settings apply, and the
device enters sleep mode according to those settings.
To set Sleep Mode:
• Switch Allow Sleep Mode to Off to block the device from
entering sleep mode and to ensure that your device stays
powered on while FliteDeck Pro is active and displayed
during flight. (Setting Allow Sleep Mode to Off reduces
battery life.)