Jeppesen FliteDeck Pro 8 (Windows 8.1) - Manual (Page 39)

Jeppesen FliteDeck Pro App Settings
Terminal Charts View Settings
Jeppesen FliteDeck Pro User Guide August 2014
Copyright © 2014 Jeppesen. All rights reserved.
34
Terminal Charts View Settings
These settings control the display of the Terminal Charts view.
• To display ownship position on the airport diagram, switch
Display Ownship on Airport Diagram to On. This setting
is Off by default.
• To display the airport diagram automatically upon landing,
switch Show Taxi Diagram on Landing to On. When
enabled, Terminal Charts displays the default taxi chart
when the device is within four nautical miles of an airport
reference point (ARP). This setting is Off by default.
• Taxi Diagram Speed Threshold is the aircraft speed at
which, if enabled, the automatic switch to a taxi diagram
occurs. The speed threshold is also the speed at which the
ownship appears on the airport diagram. You can optimize
this setting for your aircraft by adjusting the threshold
speed. Values range from 30 to 80 knots. The setting is 40
knots by default.
• Default Chart Zoom Level is the zoom level at which
terminal charts initially appear. Values are Fit Full Chart
and Fit to Width. Fit Full Chart is the default value.
Account Info Settings
Account Info includes the Version number and Registration
number for the Jeppesen FliteDeck Pro application in use.
• Version displays the application version number.
• Build displays the specific software build of the application
version.
• Registration displays the activation name that is associated
with a specific user and account.