Jeppesen FliteDeck Pro 8 (Windows 8.1) - Manual (Page 38)

Jeppesen FliteDeck Pro App Settings
Enroute View Settings
August 2014 Jeppesen FliteDeck Pro User Guide
Copyright © 2014 Jeppesen. All rights reserved.
33
Enroute View Settings
These settings control the display of the Enroute view. The
Enroute View settings are set to Off by default.
• To turn on the moving map, switch Enable Moving Map to
On. The enroute map now moves under your present
location.
With the moving map enabled, you can track your aircraft
along its route of flight, recenter the enroute map over your
present position, and view the enroute map in Track Up
orientation. Note that the Moving Map feature also requires
a reliable GPS signal.
• To display ownship position on the enroute map, switch
Display Ownship on Enroute to On.
NOTE Centering the map over aircraft location and displaying
the ownship position symbol on the enroute map are
both designed to improve flight crew situational
awareness during enroute flight.
These functions are not to be used as the basis for
navigation. Appropriate flight crew member training
and procedures emphasize set up and operation such
that the display should not become a distraction or
increase heads-down time.
Operators might require additional authorizations to
use these functions.
• To display the terrain legend on the enroute map, switch
Terrain Legend to On.
NOTE To view the terrain legend, you must also enable
Terrain in the Enroute map features. See “Viewing
Enroute Map Features.”