Ram Trucks MEDIA CENTER 730N for Jeep - Manual (Page 127)

After touching the map on the screen, a set of arrows
appears.
2. Use the arrows to navigate the center of the cross over
the desired destination.
3. Either touch the SELECT soft-key to select the desti-
nation, or touch the POIs soft-key to see a list of POIs in
the selected area.
Destination Input by Saved Trails
Touch the Saved Trails soft-key in the Destination Entry
menu.
NOTE: The Saved Trails soft-key is disabled if the trails
memory is empty. To fill the trails memory, you must
save a trail.
See the Record New Trail section in this manual for more
information.
116 NAVIGATION