Ram Trucks MEDIA CENTER 730N for Jeep - Manual (Page 44)

Select the Nighttime Colors soft-key to switch to manual
nighttime mode and to adjust the brightness of the
display using nighttime colors.
Select the Auto Color soft-key to switch to automatic
daytime/nighttime mode and to control the brightness of
the display using the light switch of the vehicle.
Touch the DONE soft-key to save your settings and to
return to the AM/FM/SAT Menu.
Screen-saver
To activate the screen-saver press the MENU hard-key
and touch the Screen Saver soft-key.
Once the screen saver is active, press any hard-key or
touch the display to deactivate it.
View Settings
Press the MENU hard-key to display a radio menu.
Touch the Default View soft-key to enable the default
view mode, where the vehicle brand logo is displayed in
the right half of the screen.
Touch the Picture View soft-key to enable the picture
view mode, where a picture can be displayed on the right
half of the radio screen. Refer to the Hard Disk Drive
section of this manual for a detailed example.
NAVIGATION 33