Ram Trucks MEDIA CENTER 730N for Jeep - Manual (Page 150)

Set Default Routing Method
Mark or unmark route parameters and then touch the
SAVE soft-key (not shown) to confirm the changes. Press
the NAV hard-key to cancel without change.
NOTE: Avoiding freeways, toll roads, tunnels or ferries
may result in very long routes.
GPS Information
The GPS Information menu displays Current Location,
Coordinates in degrees, minutes and seconds (touch the
DECIMAL soft-key to switch to Decimal degrees), num-
ber of used satellites, a map of the calculated position,
and elevation.
Press the NAV hard-key to exit to the NAV - Main Menu.
NAVIGATION 139