Ram Trucks uconnect 8.4AN for Chrysler - Manual (Page 269)

9–1–1 Call Operating Instructions
1. Press the 9-1-1 Call button on the Rearview Mirror;
NOTE: In case the 9-1-1 Call button is pushed in error, there
will be a 10 second delay before the 9-1-1 Call system
initiates a call to a 9-1-1 operator. To cancel the 9-1-1 Call
connection, press the 9-1-1 Call button on the Rearview
Mirror or press the cancellation button on the Phone Screen.
Termination of the 9-1-1 Call will turn the green LED light on
the Rearview Mirror off.
2. The LED light on the Rearview Mirror will turn green
once a connection to a 9-1-1 operator has been made;
3. Once a connection between the vehicle and a 9-1-1
operator is made, the 9-1-1 Call system may transmit
the following important vehicle information to a 9-1-1
operator:
• indication that the occupant placed a 9-1-1 Call;
• the vehicle brand; and
• the last known GPS coordinates of the vehicle.
4. You should be able to speak with the 9-1-1 operator
through the vehicle audio system to determine if
additional help is needed.
NOTE: Once a connection is made between the vehicle’s
9-1-1 Call system and the 9-1-1 operator, the 9-1-1 operator
may be able to open a voice connection with the vehicle to
determine if additional help is needed. Once the 9-1-1
operator opens a voice connection with the vehicle’s 9-1-1
Call system, the operator should be able to speak with you
or other vehicle occupants and hear sounds occurring in
the vehicle. The vehicle’s 9-1-1 Call system will attempt to
remain connected with the 9-1-1 operator until the 9-1-1
operator terminates the connection.
5. The 9-1-1 operator may attempt to contact appropriate
emergency responders and provide them with impor-
tant vehicle information and GPS coordinates.
268 Uconnect® 8.4A