Ram Trucks uconnect 8.4AN for Chrysler User Manual
Page 77
Requirements
• Vehicle must be properly equipped with the Uconnect®
8.4A or 8.4AN.
• Vehicle must be in active and usable range of autho-
rized 3G wireless signal (802.11G, 54 Mbps).
• Vehicle must be registered with Uconnect® Access and
have an active WiFi Hotspot subscription ( WiFi Out-
post will be turned off if there is no active
subscription).
• Vehicle must be in the ON/RUN or ACC (Accessory)
position and have a properly operating electrical sys-
tem for any of the in-vehicle Uconnect® features to
function.
Disclaimers
• Factors affecting the performance of WiFi Hotspot
include: cellular network signal strength and quality,
time of day, number of channels used by the service
provider, type of connection, number of clients using
WiFi Hotspot and client device.
• WiFi Hotspot does not enable direct communication
between multiple in-vehicle devices.
76
ALL ABOUT Uconnect® ACCESS