Ram Trucks uconnect 8.4AN for Chrysler - Manual (Page 198)

WARNING!
Any voice commanded system should be used only
in safe driving conditions following all applicable
laws, including laws regarding phone use. Your at-
tention should be focused on safely operating the
vehicle. Failure to do so may result in an accident
causing serious injury or death.
The Uconnect® Phone is driven through your Bluetooth®
“Hands-Free Profile” mobile phone. Uconnect® features
Bluetooth® technology - the global standard that enables
different electronic devices to connect to each other without
wires or a docking station, so Uconnect® Phone works no
matter where you stow your mobile phone (be it your purse,
pocket, or briefcase), as long as your phone is turned on and
has been paired to the vehicle’s Uconnect® Phone. The
Uconnect® Phone allows up to ten mobile phones or audio
devices to be linked to the system. Only one linked (or
paired) mobile phone and one audio device can be used with
the system at a time.
Uconnect® Phone Button
The Uconnect® Phone button on your steer-
ing wheel is used to get into the phone mode
and make calls, show recent, incoming, outgo-
ing calls, view phonebook etc., When you press
the button you will hear a BEEP. The beep is your signal
to give a command.
Uconnect® Voice Command Button
The Uconnect® Voice Command button
on your steering wheel is only used for “barge
in” and when you are already in a call and you
want to send Tones or make another call.
The button on your steering wheel is also used to
access the Voice Commands for the Uconnect® Voice
Command features if your vehicle is equipped. Please see
the Uconnect® Voice Command section for direction on
how to use the
button.
3
Uconnect® 8.4A 197