Ram Trucks uconnect 8.4AN for Chrysler - Manual (Page 280)

Direct Tune
Press the Tune soft-key located at the bottom of the radio
screen. The Direct Tune soft-key screen is available in
AM, FM, and SXM radio modes and can be used to direct
tune the radio to a desired station or channel.
Press the available number soft-key to begin selecting a
desired station. Once a number has been entered, any
numbers that are no longer possible (stations that cannot
be reached) will become deactivated/grayed out.
Undo
You can backspace an entry by touching the bottom left
Undo soft key.
GO
Once the last digit of a station has been entered, the
DIRECT TUNE screen will close and the system will
automatically tune to that station.
The selected Station or Channel number is displayed in
the Direct Tune text box.
Setting Presets
The Presets are available for all Radio Modes, and are
activated by touching any of the six Preset soft-keys,
located at the top of the screen.
When you are receiving a station that you wish to
commit into memory, press and hold the desired num-
bered soft-key for more than two seconds or until you
hear a confirmation beep.
The Radio stores up to 12 presets in each of the Radio
modes. A set of 6 presets are visible at the top of the radio
screen.
You can switch between the two radio presets by touch-
ing the “arrow” soft-key located in the upper right of the
radio screen.
4
Uconnect® 8.4AN 279