Canon SCANFRONT M11058 - Manual (Page 43)

3-13
3
Operating Pr
ocedures
7.
Scanning Procedures
You can perform scanning from the Home screen or the Job Button screen.
❏ Scanning From the Home Screen
Press a destination selection (E-mail, FTP, Shared folder,
or USB memory) button to open an address selection
screen and then select an address to send an image file.
If you press the USB memory destination selection button,
press [Downward] and specify the folder in the USB
memory to which you want to save the image file.
If you select an address and then press [Next], the Scan/
Delivery Options screen appears. Set the scanning
conditions and then start scanning.
❏ Scanning From the Job Button Screen
If you press a job button, the Scan/Delivery Options screen
appears. Confirm the address and scanning settings
registered to the job button and then start scanning.
For details on the scanning procedure, read from the
setting of scanning conditions in Step 5.
IMPORTANT
• The settings screen display and the screen displayed after
scanning differ depending on the job button settings. For
details on the overall flow from configuring settings to sending
an image file, see “Flow of Scanner Operations” on p. 3-2.
• It is not possible to save to USB memory from a job button.