Cobra Electronics MICROTALK CXR925C - Manual (Page 9)

Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Customer Assistance Warranty Introduction Operation
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Mode Functions
Operation
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK ® radio can be used “hands-free,”
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid transmissions
triggered by background noise.
To turn VOX mode on or off:
1. Press the Mode button until the VOX icon flashes
on the display. The current on or
off setting is displayed.
2. Press the Channel Up or Channel Down button
to turn VOX on or off.
3. Choose one of the following:
a. Press the Mode button to enter the selected
on or off setting and proceed
to other functions.
b. Press the Lock/Enter button to enter
the selected on or off setting and return
to Standby mode.
To set VOX sensitivity:
1. Press the Mode button until the VOX icon flashes
and the current sensitivity level
is displayed.
The current sensitivity level is displayed
with letters “LE” and a Number 01 through
05, with Number 05 being the most
sensitive level and Number 01
being the least sensitive level.
2. Press the Channel Up or Channel Down button
to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter
the selected setting and proceed to
other functions.
b. Press the Lock/Enter button to
enter the selected setting and return
to Standby mode.
VOX Icon
VOX Sensitivity Level
Mode Button
NOAA* All Hazards Radio Channels
•
You can use your microTALK ® radio to listen to NOAA All Hazards
Radio channels transmitting in your area.
To listen to All Hazards Radio channels:
1. Press the Mode button until the WX (All Hazards
Radio) icon, the currently selected All Hazards
Radio channel, and signal strength are displayed.
2. Use the Channel Up or Channel Down button to
change All Hazards Radio channels.
3. WX (All Hazards Radio) icon will continue to be
displayed when All Hazards Radio is on. Choose
one of the following:
a. Press the Mode button to proceed
to other functions.
b. Press the Lock/Enter button to exit
All Hazards Radio channels mode
and return to Standby mode.
*National Oceanographic and Atmospheric Administration
Hazards Radio Icon
Mode Button
LI 7300
Channel Button
LI 7300
Channel Button
12 English 13 Nothing Comes Close to a Cobra ®
CXR925C_ENG_MANL.indd 12-13 12/15/09 2:19 PM