Baumer BA Scatec10 15 User Manual
Page 2
User manual Scatec-10 / -15
2 / 44
Baumer Electric AG
Version 2011-03
www.baumer.com
Frauenfeld, Switzerland
General notes
Rules for proper
usage
This product represents a precision measuring device which has been designed for
the detection of objects and parts. It generates and provides measured values
issued as electrical signals for following systems.
Unless this product has not been specifically marked it may not be used in
hazardous areas.
Set-up
Installation, mounting and adjustment of this product may only be executed by
skilled employees.
Installation
Only mounting devices and accessories specifically provided for this product may
be used for installation.
Unused outputs may not be connected. Unused strands of hard-wired sensors must
be isolated. Do not exceed the maximum permissible bending radius of the cable.
Before connecting the product electrically the system must be powered down.
Where screened cables are mandatory, they have to be used in order to assure EMI
protection. When assembling connectors and screened cables at customer site the
screen of the cable must be linked to the connector housing via a large contact
area.