Baumer BA DenexEdgeDetectorII - Manual (Page 9)

User Manual DENEX Edge Detector II 9/20 Baumer Electric AG
Version 2013-02, V1.6 www.baumer.com Frauenfeld, Switzerland
4.2 DIP-Switch Settings
An 8-pole DIP-switch can be reached via the lid on top of the sensor. Unscrewing the
screw opens the lid.
The software functions can be controlled via the DIP switches.
DIP-Switch positions
= OFF
= ON
DIP-switches 1-4 are reserved for factory.
DIP-switches 5-8 are for selecting operation mode
All in OFF-position is the default setting.
DIP-Switches
5 6 7 8
Mode 0 =
Default Commercial products: For timing applications, Blocking 15%, Output 5 ms
Mode 1 Counting application: Blocking time 30%, Output 5 ms
Mode 2 Timing application: Blocking time 15%, Output: 20 ms
Mode 3 Counting mode: Blocking time 15%,Otput: 20 ms
Mode 4 Newspapers, Blocking time 30%, Output: 20 ms
Mode 5 Edge detecting: Blocking time 15%, Output: 5 ms
Mode 6 Edge detecting: Blocking time 15%, Output: 20 ms
Mode 7 Cut edge first mode: Blocking time 46 %, Output 20 ms
Mode 8 Counting mode: Fixed blocking time = 7 ms, Output 5 ms.
Mode 9 Commercial: No Blocking, Output 5 ms
Mode 10 reserved
Mode 11 reserved
Laser power save mode is activated in all Counting/newspaper modes.
This means the laser power will be reduced to 50% after a 60 seconds gap.