Baumer NE215 - Manual

Contents Page
1 Safety indications 2
2 Getting to know the counter 4
2.1 Block diagram 5
3 Counter connection 6
3.1 Supply voltage connection 6
3.2 Assignment of signal outputs „relays contact“ 7
3.3 Assignment of signal inputs 8
3.4 Encoder supply connection 9
3.5 Interface connection 9
3.6 Executing the test routine 10
4 Operator mode 11
5 Programming mode 14
5.1 Operating modes 20
5.2 Counting modes for main and totalizing counter 21
5.3 Output responses (output modes) 21
6 Technical Data 22
6.1 Dimensions and cutout size 23
6.2 Default settings 23
6.3 Error messages 23
7 Open interface description 24
8 Supplementary manual open and closed
interface
34
9 Supplementary operation manual
scaling factor
36
10 Suitable encoder 37
11 Order designation 39
Baumer IVO GmbH & Co. KG
P.O. Box 3360
•
D-78022 Villingen-Schwenningen
Phone +49 (0)7720 942-0
•
Fax +49 (0)7720 942-900
www.baumer.com
•
e-mail: [email protected]
Operating Instructions
Electronic preselection counter
NE215 preliminary testing by PTB
06.12
•
171.02.109/4
Subject to modifcation in technic & design.