Baumer NE215 - Manual (Page 13)

13
NE215 Operating mode
Secondary counter preset status
To read Press the key.
Read the secondary preset value.
To change Press the key
● LED B1 flashes.
Press the key.
● Preset value of the batch counter is being deleted.
Input the new secondary counter preset value via the numerical
keypad.
Press the key.
● To change is completed.
If a key is not operated within 15 seconds, the preset value will
automatically be re-displayed in the operating mode.
Other changes Press the key.
● The following values can also be changed.
If other values are changed, the value at witch the operating level
was left can be re-displayed with the
key after the
programming mode has been left.
Time meter
The time meter can be disbled in the programming mode.
To change Press the key.
Read the time meter
Press the key.