12 setting oven controls – FRIGIDAIRE FFGS3025PS User Manual

Page 12

Advertising
background image

12

SETTING OVEN CONTROLS

1. Clock - Use to set the time of day.

2. Timer on-off - Use to set or cancel the minute timer.

The minute timer does not start or stop any cooking
function. Timer on-off is used to set the continuous bake
function.

3. Bake time - Use to enter the length of baking time

desired.

4. Start time - Use to set the desired start time for baking

& self-clean. May be used with bake time to program a
delayed timed bake.

5. Oven light - The oven light will glow each time the oven

turns on to maintain the set oven temperature.

6. Preheat light - The preheat light will glow when the

oven is first set to operate or if the desired temperature
is reset higher than the actual oven temperature.

7. Door locked - The door locked light will flash when the

oven door locks and unlocks, the oven door lockout is
active or when the self-clean cycle feature is active.

8. Up and Down arrows - Use with the feature or function

keys to set oven temperature, bake time, start time,
clean time (when programming an automatic start time),
setting or adjusting the clock and minute timer.

9. Bake - Use to select bake feature.

10. Clear-off - Use to clear any feature previously entered

except the time of day and minute timer. Press clear off
to stop cooking. Also use clear off to activate oven
lockout feature.

11. Broil - Use to set broil feature.

12. Clean - Use to set self-clean cycle.

Setting the Clock

When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash 12:00. It is recommended to always set the clock
for the correct time of day before using the appliance.

To set the clock

1. Press clock once (do not hold clock key down).

2. Within 5 seconds, press and hold the

or

until the correct time of day appears in the display.

Changing temperature display (°F or °C)

The electronic oven control is set to display °F (Fahrenheit)
at the factory. The oven may be programmed for any
temperature from 170°F to 550°F (77°C to 288°C).

To change the temperature to display °C (Celsius) or
from °C to °F

1. Press broil. — — appears in the display.

2. Press and hold

until HI appears in the display.

3. Press and hold broil until °F or °C appears in the display.

4. Press the

or

to change °F to °C or °C to °F.

5. Press any control key to return to normal operating
mode.

2

4

5

6

7

8

10

12

1

3

11

9

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.

For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.

The clock cannot be changed when the oven is set for
cooking or if self-clean is active.

NOTE

SETTING OVEN CONTROLS

Advertising
This manual is related to the following products: