Setting oven controls – FRIGIDAIRE FGEF3055MF User Manual

Page 17

Advertising
background image

17

SETTING OVEN CONTROLS

Changing oven temperature display mode

The oven control is preset to display the oven temperature

with Fahrenheit values. The control may be changed to
display either Fahrenheit or Celsius temperatures.
To change the temperature display mode:

Step

Press

1. Press and hold broil for

6 seconds.

2. Press self-clean to toggle

between Fahrenheit or Celsius

temperature display modes and

release keypad when the mode

you prefer is displayed.

3. Press start to accept.

NOTE

The temperature display mode option cannot be

changed when the oven is active with any cooking

function or during self-clean.

To switch between audible or silent keypad

operation modes:

Step

Press

1. Press and hold

delay start for 6 seconds.

2. Press self-clean

to toggle between "bEEP On" (Fig. 1)

or "bEEP OFF" (Fig. 2).

Release keypad when the mode you

prefer is displayed.

3. Press start to accept.

Setting for audible or silent keypad

operation

Normally a beep will sound each time a keypad is pressed.

If desired, the control may be set for silent keypad

operation.

Fig. 1

Fig. 2

When the control is set for silent keypad operation the

timer, preheat and any end of cycle or error tone

alerts will remain audible.

NOTE

Fig. 3

Setting oven lock

The control may be programmed to lock the oven door

and lock the oven control keypad operations.
To activate the oven lock feature:

Step

Press

Press and hold lock keypad for 3 seconds.

"door Loc" will appear in the display until

the oven door is completely locked.

Press and hold lock keypad for 3 seconds.

Once the oven door has unlocked the

"door Loc" message will no longer display

(See Fig. 3).

To cancel the oven lock feature:
Step

Press

NOTES

• To avoid possible damage to the oven door latching

mechanism, do not attempt to force open the oven

door whenever the door Loc message is displayed.

• If a control keypad is pressed when oven lock is

active, the oven control may produce an error tone

(triple beep) indicating the keypad action requested is

not available when the oven lock feature is active.

Advertising
This manual is related to the following products: